Insulation in Irving, TX
Crawl space encapsulation and vapor barrier work in Irving typically runs $1,800-$5,000 depending on square footage and access, and it’s the single highest-impact fix for the damp, musty air moving up through older ranch homes here. Most Irving houses we enter were built in the 1960s and 1970s on slab foundations, with vented crawl spaces that pull in North Texas humidity year-round. Call (855) 657-3403 and a live person answers, 24/7, not a voicemail tree.
Why Irving Homes Are Different
Irving splits into two housing realities. The original subdivisions anchored around MacArthur Park, the older sections of Valley Ranch, and central and south Irving are packed with 1960s-1980s brick ranch homes on slab foundations. Their original fiberglass batts have frequently settled to functional R-7 or lower, and wall cavities were never insulated beyond a single batt layer. At the same time, Las Colinas holds one of the densest concentrations of corporate campuses and hotel towers in the entire DFW Metroplex. That split means Irving insulation contractors must be fluent in both legacy residential retrofits and large-scale commercial assemblies, a combination you won’t find pushed as hard in neighboring Coppell or Grand Prairie.
Climate hits Irving hard. Attic temperatures routinely exceed 150°F in July and August, which degrades older fiberglass batting faster than its rated lifespan and pushes HVAC systems toward failure in the older housing stock. Winter Storm Uri in February 2021 exposed how those minimally insulated 1960s-70s homes could not retain heat during a prolonged freeze. And there’s a failure pattern we see block after block in Irving’s central and south-side ranch homes: soffit venting partially blocked during 1990s re-roofing jobs. If you add blown-in insulation without fixing the venting, you trap summer moisture at the roof deck and accelerate sheathing rot.
Our Main Irving Services
Two services dominate the calls we get from Irving homeowners: crawl space encapsulation for the damp, musty ranch homes that sit low to the ground, and attic insulation for the heat-soaked ceiling assemblies that cook all summer long.
Attic Insulation in Irving
Most Irving attics we inspect are holding R-7 to R-11 of settled fiberglass when they should be at R-38 or higher for North Texas. Add blocked soffit vents from old re-roofing jobs, and you have a system that bakes the upstairs while running the AC nonstop. We pull the old material, correct the venting, air seal, and blow in fresh insulation rated for this climate. See the full breakdown on our Attic Insulation in Irving page, including what it costs to do it right the first time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Crawl Space Encapsulation & Vapor Barrier in Irving
Crawl space encapsulation in Irving usually costs between $1,800 and $5,000, with most jobs wrapping up in one visit. What makes Irving jobs different from other North Texas cities is the slab-on-grade construction era: homes built in the 1960s and 1970s often have vented crawl spaces that pull in humid air every day from May through October, and that moisture migrates up into the living space. We install heavy-duty vapor barriers and seal the space properly, which drops indoor humidity, reduces musty odors, and protects floor framing from rot. This is the foundation of a healthy home, and it’s why our Crawl Space Encapsulation & Vapor Barrier service starts with a careful inspection of the existing conditions before any material goes down.
Crawl Space Vapor Barrier
Signs you need it
Damp concrete, a musty smell that won’t quit, or visible condensation on ductwork in the crawl space during Irving’s humid summers.
What it costs in Irving
Vapor barrier installation in Irving typically ranges from $1,800 to $3,200 depending on square footage and access clearance.
How we do it
We lay a high-density polyethylene liner across the floor, run it up the walls, and mechanically fasten it. Seams are taped and all edges are sealed so ground moisture stays below the liner.
Crawl Space Encapsulation
Signs you need it
Wood floor joists showing dark stains, rust on metal supports, or a crawl space that stays damp even after the rains stop.
What it costs in Irving
Full encapsulation, including sealing vents and conditioning the space, typically runs $2,800 to $5,000 in Irving.
How we do it
We seal the vents, install the vapor barrier, insulate the perimeter walls, and add a dehumidifier when the space needs active moisture control. The result is a clean, dry, conditioned crawl space.
Crawl Space Moisture Control
Signs you need it
Standing water after heavy rain, saturated insulation falling from between floor joists, or humidity routinely above 60% on a simple gauge.
What it costs in Irving
Moisture control measures, including drainage improvements and dehumidifier installation, typically cost $1,800 to $3,500 depending on the scope.
How we do it
We identify the moisture source first, whether it’s groundwater, a plumbing leak, or outside air. Then we correct the source and install the right barrier system for that specific crawl space.
What Crawl Space Encapsulation & Vapor Barrier Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Vapor barrier (basic) | $1,800-$2,800 |
| Full encapsulation | $2,800-$5,000 |
| Dehumidifier (add-on) | $1,400-$2,400 |
| Sump pump (add-on) | $1,200-$2,000 |
How long does crawl space encapsulation take in Irving?
Most Irving crawl space encapsulation jobs finish in one day, sometimes two if the space is tight or a dehumidifier and sump pump are being added. We give you a firm timeline before we start, and the price we quote is the price you pay.
Does a vapor barrier actually lower my electric bill in Irving?
Yes. When the crawl space stops feeding humid air into the house, the AC doesn’t have to work as hard to pull moisture out of the air. Many Irving homeowners report lower July and August bills within the first full billing cycle after encapsulation. Call (855) 657-3403 to have us look at your crawl space.
Spray Foam Insulation in Irving
Spray foam insulation in Irving is the fix for attics and rim joists that leak air continuously, and it’s especially effective on those 1960s and 1970s ranch homes where original fiberglass has collapsed to R-7 or less. In Irving’s climate, closed-cell foam also acts as a moisture barrier, which matters when attic temperatures hit 150°F and humidity stays high. We install both open-cell and closed-cell systems, and our Spray Foam Insulation work is backed by the 90-Day Done Right Promise so you never have to wonder if it was applied correctly.
Open-Cell Spray Foam
Signs you need it
Upstairs rooms that stay 8-10 degrees hotter than downstairs in summer, or airflow you can feel around attic hatches and ceiling fixtures.
What it costs in Irving
Open-cell spray foam in Irving typically costs $1.50-$3.00 per board foot installed.
How we do it
We apply the foam directly to the underside of the roof deck and gable walls, creating an air seal that stops the stack effect driving your AC bill up.
Closed-Cell Spray Foam
Signs you need it
Moisture problems in a crawl space or rim joist, or the need for structural rigidity in older Irving homes where framing has settled.
What it costs in Irving
Closed-cell spray foam in Irving typically runs $2.50-$5.00 per board foot installed.
How we do it
We apply a denser foam that cures rigid and adds both insulation value and moisture resistance. It’s the right choice for crawl space walls and rim joists in humid North Texas summers.
Rim Joist Spray Foam
Signs you need it
Cold floors in winter, persistent mustiness, or visible gaps where the foundation meets the first floor framing in Irving slab homes.
What it costs in Irving
Rim joist spray foam in Irving typically costs $700-$1,800 for a full perimeter treatment.
How we do it
We seal every rim joist bay around the house with closed-cell foam, which kills the air leak and insulates in one pass.
What Spray Foam Insulation Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Open-cell (per board foot) | $1.50-$3.00 |
| Closed-cell (per board foot) | $2.50-$5.00 |
| Rim joist package | $700-$1,800 |
| Full attic spray foam (avg home) | $5,000-$12,000 |
Is spray foam worth it in a 1970s Irving home?
Usually yes. The payback on closed-cell foam in older Irving homes comes from lower summer cooling costs and reduced humidity damage. If the home still has original fiberglass, you’re likely losing far more money than the foam costs over a few years. Call (855) 657-3403 for a look at your attic.
Can you spray foam over old insulation in Irving?
No, not correctly. Old, settled fiberglass or rodent-contaminated material must come out first. In Irving’s older subdivision homes we frequently find roof deck moisture damage under the old batting that would be sealed in under foam. We remove, assess, then foam.
Blown-In Insulation in Irving
Blown-in insulation in Irving is the most common retrofit we do on 1960s-1980s ranch homes where the original attic material has settled below R-7 and the house just can’t hold temperature anymore. We use GreenFiber cellulose or Johns Manville fiberglass depending on the attic and the homeowner’s goals, and we always check ventilation before we blow. That matters in Irving, because the soffit venting blocked during 1990s re-roofing jobs is one of the most common failure points we find. Our Blown-In Insulation work includes a ventilation check on every attic, not as an upgrade but as a standard part of the job.
Blown-In Cellulose
Signs you need it
Attic insulation that looks sparse between joists, rooms that heat up quickly after the AC shuts off, or visible settling in an older Irving home.
What it costs in Irving
Blown-in cellulose in Irving typically costs $1.20-$2.00 per square foot installed to attic depth.
How we do it
We air seal the attic floor first, then blow GreenFiber cellulose to a consistent depth across every bay, paying close attention to the eaves where air leaks hide.
Blown-In Fiberglass
Signs you need it
New construction or a clean attic that needs an even, low-dust fill, or when an existing fiberglass system just needs a top-up.
What it costs in Irving
Blown-in fiberglass in Irving typically costs $1.00-$1.80 per square foot installed to standard depth.
How we do it
We blow Johns Manville fiberglass in a uniform layer, checking depth with a ruler as we go so the R-value you paid for is the R-value you get.
Blown-In Top-Up
Signs you need it
Attic insulation that’s in decent shape but below code or below what North Texas heat demands, and existing material that’s dry and clean.
What it costs in Irving
A blown-in top-up over existing material in Irving typically runs $0.80-$1.40 per square foot.
How we do it
We blow new material directly over the old, after confirming the existing layer is dry and free of rodent damage or mold.
What Blown-In Insulation Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Blown-in cellulose (attic) | $1.20-$2.00/sq ft |
| Blown-in fiberglass (attic) | $1.00-$1.80/sq ft |
| Top-up over existing | $0.80-$1.40/sq ft |
| Dense-pack wall | $2.00-$4.00/sq ft |
How deep should blown-in insulation be in Irving attics?
For North Texas, you want R-38 to R-49 in the attic. That’s roughly 12 to 16 inches of blown cellulose depending on the product. Most Irving homes we see from the 1960s and 1970s are running R-7 to R-11, which is less than a third of what this climate demands. Call (855) 657-3403 and we’ll measure yours.
Does blown-in insulation settle and stop working in Irving heat?
Quality blown-in material settles slightly in the first year, then holds. The real problem is old fiberglass batt that has collapsed over 40 years of 150°F attic cycles. Blown-in installed correctly stays loose and effective for the life of the home.
Radiant Barrier Installation in Irving
Radiant barrier installation in Irving is the one upgrade that directly attacks the 150°F attic temperatures this city sees every July and August. A foil radiant barrier stapled to the underside of the roof deck reflects radiant heat before it can soak into the insulation and push down into the house. For Irving’s older brick ranch homes, where the attic is a heat reservoir that never fully cools overnight, this is one of the most immediately noticeable improvements we install. Our Radiant Barrier Installation team pairs the barrier with a ventilation check, because blocked soffit vents and a radiant barrier in the wrong configuration make the problem worse.
Attic Radiant Barrier
Signs you need it
Upstairs rooms that won’t cool below 80°F during summer afternoons, or an attic that feels like an oven when you open the hatch.
What it costs in Irving
Attic radiant barrier in Irving typically costs $1,200-$2,800 for a standard ranch home roof deck.
How we do it
We staple a reinforced foil barrier to the underside of the roof rafters, creating a reflective surface that bounces heat back out through the roof.
Radiant Barrier Foil
Signs you need it
Single-pane windows that make west-facing rooms unusable in the afternoon, or a home where the AC runs continuously from noon to midnight.
What it costs in Irving
Foil radiant barrier material and labor in Irving typically runs $0.80-$1.50 per square foot of roof deck.
How we do it
We use a double-sided foil with a reinforcing scrim that resists tearing during installation, and we overlap seams so heat can’t find a way through.
Radiant Barrier & Ventilation
Signs you need it
An older Irving home where re-roofing in the 1990s blocked original soffit vents, or an attic with no ridge vent and no air movement.
What it costs in Irving
Combined radiant barrier and ventilation correction in Irving typically runs $1,800-$3,500 depending on vent restoration scope.
How we do it
We restore the soffit venting first, then install the radiant barrier. The barrier reflects heat while the restored airflow carries it out of the attic.
What Radiant Barrier Installation Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Radiant barrier (full roof deck) | $1,200-$2,800 |
| Foil barrier (per sq ft) | $0.80-$1.50 |
| Barrier + ventilation fix | $1,800-$3,500 |
| Garage ceiling barrier | $400-$900 |
Does radiant barrier really work in Irving’s heat?
Yes, when it’s paired with working ventilation. In Irving attics where the soffit vents are open, radiant barrier drops attic temperature by 20-30°F on a hot afternoon. That directly reduces the heat load on your AC and lowers your July bill. Call (855) 657-3403 to see if your venting is ready for it.
Can I install radiant barrier over my existing insulation in Irving?
Radiant barrier goes on the roof deck, not over the insulation on the floor. Installing foil over the attic floor is a common DIY mistake that traps moisture and destroys the barrier’s effectiveness. We install it correctly on the rafter underside.
Insulation Removal & Replacement in Irving
Insulation removal and replacement in Irving is the starting point for many retrofit jobs here, because so many 1960s and 1970s ranch homes still have original fiberglass that’s been through decades of 150°F attic cycles, roof leaks, and rodent traffic. You can’t blow new material over contaminated or collapsed batting and expect it to perform. We vacuum out the old material, sanitize where needed, and install fresh insulation rated for North Texas. Our Insulation Removal & Replacement team handles everything from simple batt removal to full vermiculite and contaminated material jobs, all in a single visit in most Irving homes.
Attic Insulation Removal
Signs you need it
Insulation that’s flattened, dark, and matted down, or material that’s clearly been wet and dried multiple times in an older Irving attic.
What it costs in Irving
Attic insulation removal in Irving typically costs $1.00-$2.00 per square foot for a standard ranch home attic.
How we do it
We run a high-powered vacuum line to a truck-mounted system, extracting every bit of old material down to the drywall, then prep the surface for new insulation.
Contaminated Insulation Removal
Signs you need it
Rodent droppings, urine stains, or a strong ammonia smell coming from the attic, or mold visible on the underside of batting in Irving’s humid summers.
What it costs in Irving
Contaminated insulation removal in Irving typically costs $1.50-$3.00 per square foot due to the extra handling and sanitizing required.
How we do it
We remove the contaminated material under proper containment, sanitize the attic surfaces, and then install fresh insulation plus rodent proofing to keep the problem from returning.
Insulation Replacement
Signs you need it
Uneven temperatures room to room, insulation that has settled to R-7 or less, or energy bills that climb every summer in Irving’s older subdivisions.
What it costs in Irving
Full insulation replacement, including removal and new blown-in material, typically runs $3,000-$7,000 in Irving depending on attic size and depth.
How we do it
We remove the old material, air seal the attic floor, correct any venting issues, and blow in fresh Owens Corning or GreenFiber insulation to the right R-value for North Texas.
What Insulation Removal & Replacement Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Standard attic removal | $1.00-$2.00/sq ft |
| Contaminated removal | $1.50-$3.00/sq ft |
| Salvageable top-up (no removal) | $0.80-$1.40/sq ft |
| Full removal + new blown-in | $3,000-$7,000 |
How do I know if my Irving attic insulation needs full removal?
If it’s collapsed, rodent contaminated, water stained, or so old it’s lost its loft, it needs to come out. Adding new material over a failed layer doesn’t fix the air leaks and moisture issues underneath. Call (855) 657-3403 and we’ll inspect it honestly, no pressure.
Can you remove and replace insulation in one day in Irving?
Most standard Irving ranch home attics can be fully removed and re-insulated in a single day. Contaminated jobs with sanitizing take longer. We’ll give you a firm answer before we start, and the quote we give is what you pay.
Attic Air Sealing in Irving
Attic air sealing in Irving is the missing first step on most retrofit jobs in this city’s older homes. Before new insulation goes in, the air leaks between the living space and the attic have to be sealed, otherwise you’re paying to insulate a sieve. In Irving’s 1960s and 1970s ranch homes, we routinely find top plates, can lights, and attic hatches that leak air as badly as an open window. Our Attic Air Sealing service uses foam, caulk, and gaskets to close every penetration before any new material goes down, and it’s part of why our retrofits perform measurably better than a simple top-up.
Attic Floor Air Sealing
Signs you need it
Upstairs rooms that stay hot while the downstairs is fine, or daylight visible around ceiling fixtures when you look up from the attic.
What it costs in Irving
Full attic floor air sealing in Irving typically costs $600-$1,200 for a standard ranch home.
How we do it
We seal every penetration in the attic floor: plumbing stacks, electrical runs, light boxes, and chase ways. Foam and caulk close the gaps so air stops moving between floors.
Top Plate & Penetration Sealing
Signs you need it
Interior walls that feel warm to the touch in summer, or dust streaks on wall surfaces where air has been pulling through gaps.
What it costs in Irving
Top plate and penetration sealing in Irving typically runs $400-$900 depending on how many penetrations need work.
How we do it
We seal the top plate where wall cavities meet the attic, plus every wire, pipe, and duct penetration. This stops the stack effect that drives conditioned air out of the house.
Can Light & Duct Boot Sealing
Signs you need it
Recessed can lights that let dust into the house, or duct boots in the attic that show gaps around their edges.
What it costs in Irving
Sealing can lights and duct boots in Irving typically costs $300-$700 for a full attic.
How we do it
We install sealed covers over non-IC can lights and seal every duct boot with mastic and foam so air can’t bypass the insulation.
What Attic Air Sealing Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Full attic floor sealing | $600-$1,200 |
| Top plate & penetrations | $400-$900 |
| Can lights & duct boots | $300-$700 |
| Attic hatch sealing | $150-$400 |
Why does air sealing matter more in Irving than insulation alone?
Because North Texas heat and humidity move through gaps continuously. Sealing first means the air that stays in the house is dry, conditioned air. Adding insulation without sealing just hides the problem under more fiberglass. Call (855) 657-3403 to have your attic checked.
Does attic air sealing make a noticeable difference on the utility bill?
Yes, and it’s often the highest-ROI dollar per dollar fix we do in Irving. Most homeowners see a drop in cooling costs within the first month after sealing, especially in July and August when the AC runs hardest.
Wall Insulation in Irving
Wall insulation in Irving is the retrofit most people don’t know they need, because the 1960s and 1970s brick ranch homes here were built with wall cavities that were never insulated beyond a single batt layer, and even that has sagged and settled over the decades. The brick veneer holds heat all afternoon and radiates it into the living space well after sunset. We fix this with injection foam or drill-and-fill methods that don’t require tearing out drywall. Our Wall Insulation team works from the exterior or interior depending on the home, and we’re careful to match the method to Irving’s specific wall assemblies.
Injection Foam Wall Insulation
Signs you need it
Rooms that heat up within ten minutes of the sun hitting that wall, or walls that feel warm to the touch on a summer evening in Irving.
What it costs in Irving
Injection foam wall insulation in Irving typically costs $2.50-$5.00 per square foot of wall area.
How we do it
We drill small holes through the wall and inject expanding foam that fills the entire cavity from top to bottom, then patch the holes cleanly.
Drill & Fill Wall Insulation
Signs you need it
An older Irving brick ranch where the wall cavities have never been touched, or rooms that stay cold in January despite the heater running.
What it costs in Irving
Drill and fill wall insulation in Irving typically runs $2.00-$4.00 per square foot depending on access.
How we do it
We drill access holes at each stud bay and blow in dense-pack cellulose or fiberglass until the cavity is completely full, then close the holes.
Interior Wall Soundproofing
Signs you need it
A home office or bedroom that picks up every noise from the living room, or a shared wall between units in Irving’s multi-family buildings.
What it costs in Irving
Interior wall soundproofing in Irving typically costs $3.00-$6.00 per square foot.
How we do it
We install dense sound-absorbing insulation in the interior wall cavities, often paired with air sealing to stop sound from traveling through gaps as well.
What Wall Insulation Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Injection foam wall | $2.50-$5.00/sq ft |
| Drill & fill wall | $2.00-$4.00/sq ft |
| Interior soundproofing | $3.00-$6.00/sq ft |
| Garage wall insulation | $1.50-$3.00/sq ft |
Can you insulate the walls on my 1970s Irving brick home without tearing anything out?
Yes. Drill and fill and injection foam are both done through small holes that we patch afterward. You don’t lose drywall, and the difference in comfort is immediate. Call (855) 657-3403 for an assessment.
Why are my Irving walls so hot in summer even with attic insulation?
Because the brick veneer absorbs heat all day and radiates it inward through uninsulated wall cavities. Attic insulation does nothing for that. Wall insulation stops the radiant heat where it enters.
Attic Cleaning & Rodent Proofing in Irving
Attic cleaning and rodent proofing in Irving is the service that makes every other insulation job possible, because you cannot safely blow new material over rodent waste and chewed batting. The older ranch homes across Irving’s original subdivisions are particularly vulnerable: soffit gaps from old re-roofing jobs, roof lines with easy climbing access, and attics that stay dry and warm all winter make ideal nesting sites. We clean, sanitize, and then proof the attic so the problem doesn’t come back. Our Attic Cleaning & Rodent Proofing work includes the exclusion work most contractors skip, because a cleaned attic with an open hole is just an invitation.
Attic Cleanout
Signs you need it
Accumulated debris, old boxes, or years of dust and blown-in material that’s been trampled down in an Irving attic.
What it costs in Irving
Attic cleanout in Irving typically costs $700-$1,500 depending on attic size and the amount of debris.
How we do it
We remove all debris, bag it, and vacuum the attic floor to a clean surface so any new insulation has a proper base.
Attic Sanitizing & Decontamination
Signs you need it
Rodent droppings in the insulation, a persistent ammonia odor, or visible mold on the underside of the roof deck in Irving’s humid climate.
What it costs in Irving
Attic sanitizing in Irving typically costs $1,200-$2,500 including the cleanout and treatment.
How we do it
We remove contaminated material, apply an antimicrobial treatment to the surfaces, and leave the attic clean and safe for new insulation or storage.
Rodent Proofing & Exclusion
Signs you need it
Scratching sounds at night, entry holes around rooflines, or repeated rodent problems despite trapping in Irving’s older neighborhoods.
What it costs in Irving
Rodent proofing and exclusion in Irving typically runs $500-$1,500 depending on the number of entry points.
How we do it
We seal every gap, crack, and penetration with steel mesh and foam that rodents can’t chew through, then verify the attic is truly closed off.
What Attic Cleaning & Rodent Proofing Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Attic cleanout | $700-$1,500 |
| Sanitizing & decontamination | $1,200-$2,500 |
| Rodent proofing & exclusion | $500-$1,500 |
| Full attic restoration | $2,500-$5,000 |
How do rodents get into Irving attics in the first place?
Through roof joints, soffit gaps, and vent openings. In Irving’s older brick ranch homes, many of those gaps date back to 1990s re-roofing work that covered original soffit venting. We find and seal every opening. Call (855) 657-3403 to schedule an inspection.
Can you clean my attic and install new insulation the same week in Irving?
Most Irving attic cleanout and insulation replacement jobs are completed within two days, and many in one visit. We coordinate the whole job so you’re not juggling two different crews and their schedules.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Home Energy Audit in Irving
A home energy audit in Irving is the diagnostic starting point that tells us exactly where your house is losing money before we recommend any single fix. For Irving’s 1960s and 1970s ranch homes, the audit usually reveals a predictable pattern: settled attic insulation, unsealed top plates, and wall cavities that were never properly filled. Instead of guessing, we measure, and that measurement makes every other service we do smarter and more targeted. Our Home Energy Audit includes blower door testing, thermal imaging, and a written report you can use to plan upgrades in the right order.
Blower Door Test
Signs you need it
High utility bills with no obvious source, rooms that never hold temperature, or a home that feels drafty in winter despite new windows.
What it costs in Irving
A blower door test in Irving typically costs $300-$600 as part of a full energy audit.
How we do it
We mount a calibrated fan
Pricing for Insulation in Irving, TX
| Service | Typical range in Irving |
|---|---|
| Vapor barrier (basic) | $1,800–$2,800 |
| Full encapsulation | $2,800–$5,000 |
| Open-cell (per board foot) | $1.50–$3.00 |
| Closed-cell (per board foot) | $2.50–$5.00 |
| Blown-in cellulose (attic) | $1.20–$2.00/sq ft |
| Blown-in fiberglass (attic) | $1.00–$1.80/sq ft |
| Radiant barrier (full roof deck) | $1,200–$2,800 |
| Standard attic removal | $1.00–$2.00/sq ft |
| Full attic floor sealing | $600–$1,200 |
In Irving, price depends mostly on attic access, how much depth is needed to bring insulation up to standard, whether old batts have to come out first, and crawl space size where that applies. Commercial-adjacent properties near Las Colinas can add complexity too. We inspect first and write the price before work starts.
FAQs About Insulation in Irving, TX
How fast can you schedule an Irving job?
We usually schedule Irving visits within a few days of your call. If your attic is hitting extreme summer temperatures and affecting comfort, let us know so we can prioritize. If your timing is flexible we’re happy to work around it, and either way we’ll confirm the exact appointment window with you before the day of the visit.
Is a permit needed for insulation work in Irving?
Routine attic and wall insulation typically does not require a separate permit in Irving. Larger jobs involving structural or mechanical work sometimes do, and we handle that paperwork as part of the project.
How does the estimate process work?
We inspect the attic or crawl space in person, measure the existing insulation depth, and give you a specific written price before any work begins. That estimate spells out materials, labor, and any disposal costs, and the number does not change once the crew arrives unless you ask us to add more scope to the job.
What areas near Irving do you cover?
Along with Irving, we serve Houston, Spring, The Woodlands, Katy, Pearland, and Humble. Contact us with your address and we will confirm coverage. If you’re not sure whether your address falls inside that range, just tell us your city and zip when you call and we’ll confirm coverage right away.
What do you do with the old insulation?
Old insulation is bagged and hauled away as part of the job. Settled batts from older brick ranch homes get checked for pest activity before disposal. We keep the work area clean throughout the job and walk you through the finished space before we leave.
Frequently Asked Questions
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60-minute.
- 4You approve before work beginsNothing starts until you say go.
What Irving Customers Say
"Upstairs was ten degrees hotter than downstairs every summer. They pulled the attic to bare joists, air-sealed every can light and top plate first, then blew it to R-49. First August in this house where the bedrooms and the living room read the same on the thermostat."
- Marcus Hale"Rodents had been in the attic for years before we bought the place. They vacuumed everything out, sanitized, sealed the entry points with mesh and foam, and only then put new insulation down. Photos of every stage before I paid."
- Darnell Whitfield"They did the energy audit first - blower door and thermal camera - and showed me exactly where the house was leaking before selling me anything. The fix ended up being air sealing plus a modest attic top-up, not the full replacement another company pushed."
- Grace Nakamura